Product Overview
Fitment:
Year | Model | Generation | Engine | Quantity Per Vehicle |
1998-2000 | Montero | Gen 2.5 | 3.5L V6 | 1 |
1995-1997* | Montero | Gen 2 | 3.0L V6, 3.5L V6 | 1 |
1992-1994** | Montero | Gen 2 | 3.0L V6, 3.5L V6 | 1 |
1989-1991*** | Montero | Gen 1 | 3.0L V6 LWB ONLY | 1 |
Please read entire description before purchasing
Wow! Look at this piece of unobtanium! This fuel tank is made for Gen2.5 (1998-2000) Monteros but it will also work with the following Gen1 & 2 Monteros with the minor modifications listed below:
*1995-1997
- The fuel filler hose spout on this replacement tank has a 1 5/8" outer diameter but 92-97 Monteros use a 2" fuel filler hose. You'll need this hose: VP-LO-MR271576 (Verify that the OD of your Filler Pipe at the top is 2")
**1992-1994
- The fuel filler hose spout on this replacement tank has a 1 5/8" outer diameter but 92-97 Monteros use a 2" fuel filler hose. You'll need this hose: VP-LO-MR271576 (Verify that the OD of your Filler Pipe at the top is 2")
- This tank is set up with two safety valve holes on the top instead of the network of vent pipes that go out of your existing tank to a vapor cannister on each side. To convert your vent system, you'll need two safety valves and all of the various accessories such as 3' of 1/4" fuel vapor hose, a 1/4" hose tee, 1/4 hose clamps, and 6 nuts.
***1989-1991 Long Wheel Base ONLY
- The fuel filler hose spout on this replacement tank has a 1 5/8" outer diameter but Gen1 LWB Monteros use a 2" fuel filler hose. You'll need this hose: VP-LO-MR271576 (Verify that the OD of your Filler Pipe at the top is 2")
- This tank is set up with two safety valve holes on the top instead of the network of vent pipes that go out of your existing tank to a vapor canister on each side. To convert your vent system, you'll need two safety valves and all of the various accessories such as 3' of 1/4" fuel vapor hose, a 1/4" hose tee, 1/4 hose clamps, and 6 nuts.
Related products:
- Fuel Tank Safety Valve (MR526922)
- Gen 2/2.5 Fuel Pump Assembly (MR208665)
- Gen 2/2.5 Fuel Gauge Sending Unit (MB571603)
- Gen 2.5 Fuel Filler Hose (VP-LO-MR271576)
- 1/4" Hose Tee
- Gen2/2.5 Fuel Filter
Installation Guides
*These links may contain independent information and are not a substitute for the Factory Service Manual procedure - use at your own risk.
Warranty Information
6 Months