Product Overview
Fitment:
| Year | Model | Generation | Engine |
| 2001-2006 | Montero | Gen3 | 3.5L V6, 3.8L V6 |
| Part Number | Description | Quantity Per Vehicle |
| MR418673 | Front Lower Control Arm | 4 |
| MR418674 | Rear Lower Control Arm | 2 |
| MR418739 | Rear Toe Link | 2 |
| 54559W000P | Plate | 8 |
| MU001083 | Nut | 8 |
Genuine Mitsubishi Parts
A very common problem with Gen3 Alignment Bolts is that if they are not turned regularly or you live in a high rust environment then they seize/rust to the metal inner sleeve of the mount's bushing. If an alignment tech forces the bolt to break free it will usually just tear the bushing with it. Unfortunately, seized bolts usually end up needing to be cut and hammered out. When installing these new alignment bolts, don't forget to apply antiseize to them and get an alignment regularly to keep them from seizing again. Additionally, the PolyTuff bushings we carry are free floating and eliminate this issue as well.
PolyTuff Bushings:
Rear LCA or Toe Control: CA5250K
Installation Guides
*These links may contain independent information and are not a substitute for the Factory Service Manual procedure - use at your own risk.
