||Quantity Per Vehicle
||3.5L SOHC V6
||3.0L 24V V6
||Gen1 & 2
||3.0L V6, 3.5L V6
Note - Although these manifolds will also bolt up perfectly for the 1997 Montero 3.5L, 1995 Montero 3.0L, and 1997 Montero Sport 3.0L, those early years did not have an EGR system so that is why they are not listed as compatible in the chart above. If you choose to use these manifolds for those 3 Model/Year combinations you would need to create a plug for the EGR port at your own risk.
By popular demand, we now have exhaust manifolds for the Gen2/2.5 3.5L SOHC V6 and Montero Sport 3.0L 24V and 3.5L SOHC V6s! These are made in the same factory as our popular Gen3 manifolds which we've been selling for years.
As you can see, these are not Swiss quality made parts. The castings will have imperfections and pits, the heat shield threads are often not perfectly centered, and there are visible hand grinding/finishing marks. But this unit will bolt up correctly and will get you back on the road for less than 1/2 the price of OEM.
2 Exhaust Manifold Flange studs are included: interchange Mitsubishi Part Number MR497545
. Professional installation is highly recommended for these studs, they are much harder to install than the exhaust studs located on the engine cylinder heads because they must be driven deeper into harder metal which requires a lot of force and precision.
Don't forget the gaskets! For best results, using new gaskets (not included) ensures a proper seal:
LOCATION: LEFT / DRIVER
ACCESSORIES: Includes 2 Exhaust Manifold Flange Studs