Product Overview
We have this one pair of used CRR-91 rear springs available. They were only used for about 2 weeks/500 miles on a vehicle that was too heavy for them so they switched out for a heavier duty spring model.
Complete description/specs from our new inventory Lovells page:
Fitment:
Year | Model | Generation | Engine |
2001-2002* | Montero | Gen3 | 3.5L V6 |
2003-2006 | Montero | Gen3 | 3.8L V6 |
Sold in Pairs
- Designed and Manufactured in Australia since 1930
- Made from Genuine Australian One-Steel Micro Alloy Spring Steel to ISO9002 Standards
- Heated & Tempered in Computer Controlled Furnaces and Formed on PLC Machines
- All Coils are Shot Peened & Powder Coated in Lovell's Signature Blue color
- Offers a superior On & Off Road Driving Experience even in Australia's extreme conditions
- Lovells Springs pair excellently with Bilstein 4600 and Koni shock absorbers (sold separately)
Coil Spring Recommendations - See Technical Specifications below for more detailed info or feel free to contact us with the weight of the added accessories on your Montero to confirm which spring best suits your vehicle.
Height
Standard Height = Factory ride height.
Raised Height = Lifts the vehicle 1-2" above the original factory ride height.
Extra Raised Height = Lifts the vehicle 2-3" above the original factory ride height.
* - 2001-2002 XLS trim Monteros are not as heavy as other Gen3s by enough to influence the ride height. We do not recommend Extra Raised Height springs for these vehicles unless you have at least 75 lbs of added constant weight above the specified weights in the spreadsheet below and/or are prepared to install offset camber bushings to correct alignment.
Duty
Classifies the amount of weight the springs are designed to accommodate to maintain the specified height. Available in Standard, Medium, Heavy, and *Extra Heavy (*Special Order Only).
Standard Height / Standard Duty
- Front (CFL-90CMFRT): Designed to replicate the original factory springs, No Steel Bumper
- Rear (CRL-91CMFRT): Designed to replicate the original factory springs
Raised Height / Medium Duty
- Front (CFS-90): 1-2" raised height, No Steel Bumper
- Rear (CRS-91): 1-2" raised height, 0-220lbs load carrying capacity
Extra Raised Height / Medium Duty
- Front (CFR-90): 1.5-3" raised height, No Steel Bumper
- Rear (CRR-91): 1.5-3" raised height, 0-220lbs load carrying capacity
Extra Raised Height / Heavy Duty
- Front (CFR-90HD): 1.5-3" raised height, Steel Bumper with or without a Winch, or Skid Plates, or Dual Batteries
- Rear (CRR-91HD): 1.5-3" raised height, 110lbs minimum - 440lbs load carrying capacity
Extra Raised Height / Extra Heavy Duty
- Front (CFR-90EHD): Not listed for sale, Special Order Only, Contact Us for more information. Designed for Diesel Monteros not available in USA so they require around 350lbs of added weight on US V6 Petrol Monteros. Provides 1.5-3" raised height with Steel Bumper + Steel Cable Winch + Full Skid Plates + Rock Sliders + Dual Batteries + added accessories
- Rear (CRR-92): Not listed for sale, Special Order Only, Contact Us for more information. 1.5-3" raised height, 440-880lbs load carrying capacity
- Rear (CRR-92HD): Not listed for sale, Special Order Only, Contact Us for more information. 1.5-3") raised height, 660-1,100lbs load carrying capacity
Technical Specifications
Part Number | Location | Height | Duty | Added Weight Range | Spring Type |
CFL-90CMFRT | Front |
Standard |
Standard | N/A | Linear |
CFS-90 | Front |
Raised |
Medium | 0kg min - 40kg max (0lbs min - 90lbs max) of added Constant Weight |
Linear |
CFR-90 | Front | Extra Raised | Medium | 0kg min - 40kg max (0lbs min - 90lbs max) of added Constant Weight |
Linear |
CFR-90HD | Front |
Extra Raised |
HD | 40kg min -115kg max (90lbs min - 250lbs max) of added Constant Weight |
Linear |
CFR-90EHD* | Front |
Extra Raised |
Extra HD | 160kg min - 220kg max (350lbs min - 485lbs max) of added Constant Weight |
Linear |
CRL-91CMFRT | Rear | Standard | Standard | N/A | Linear |
CRS-91 | Rear | Raised | Medium | 0kg min - 50kg max (0lbs min - 110lbs max) of added Constant Weight Up to 100kg (220lbs) Max Load |
Linear |
CRR-91 | Rear |
Extra Raised |
Medium | 0kg min - 50kg max (0lbs min - 110lbs max) of added Constant Weight Up to 100kg (220lbs) Max Load |
Linear |
CRR-91HD | Rear | Extra Raised | HD | 50kg min - 100kg max (110lbs min - 220lbs max) of added Constant Weight Up to 200kgs (440lbs) Max Load |
Linear |
CRR-92* | Rear | Extra Raised | Extra HD | 200kg min - 250kg max (440lbs min - 550lbs max) of added Constant Weight Up to 400kgs (880lbs) Max Load |
Linear |
CRR-92HD* | Rear | Extra Raised | Extra Extra HD | 300kg min - 350kg max (660lbs min - 770lbs max) of added Constant Weight Up to 500kgs (1,100lbs) Max Load |
Linear |
* - Special Order Only
Max Constant Weight and Max Load figures represent the ceiling for maintaining the specified Raised Height estimates of the spring.
- Forum Post 1
- Video - "How to fit a Pajero / Montero suspension lift kit"
- Video - Luso Overland Strut Replacement
- Video - "2" Lift Kit // QUICKEST and EASIEST way // Pajero // Shogun // Montero // Mitsubishi"
- Video - "How to install a 2 Inch Suspension Lift Kit | 4x4 | PAJERO | DIY | Lovells"
- Video - "How to Install a Lift Kit on a Gen 3 Montero"