MONTERO Gen3 - Rear Lower Control Arm, Inner OR Rear Toe Control Arm Bushings

Contents:

• 4x Rear Lower Control Arm, Inner OR Rear Toe Control Arm Bushings - Split-in-half design for easy installation
• 2x Bushing Sleeves
• 1x Grease Packet

This kit can be used in two different locations (Rear LCA, Inner or Rear Toe Control Arm) but you will need to purchase 2 kits if wanting to replace the bushings in both of these locations on both the left and right side of the vehicle. 

Keep siezed alignment bolts from ever happening again with these free-floating bushings from PolyTuff! Since the inner metal sleeve is not laminated to the bushing, even if your alignment bolt rusts to the sleeve, the eccentric bolts will still be able to turn so your vehicle's alignment can be adjusted. 

Click here for Gen3 Alignment Hardware

Proudly made in Australia and tested in the extremes of the outback, PolyTuff polyurethane components exceed OEM specifications for both durability and performance. Renowned for producing superior car and 4X4 suspension bushings, the PolyTuff secret is in their unique polyurethane formulation that delivers a great ride as well as improved handling, both on and offroad.

• OEM Outer Bushing Shell Removal Instructions
• Video - "Gen3 Montero - Front Lower Control Arm Bushings after 15 years / 175,000 miles"
• Video - "Alignment issues with the 3rd Gen Monteros"
• Video - PolyTuff "DIY How To Remove Rubber Suspension Bushing"
• Video - "Mitsubishi Montero - Control Arm Bushing Sleeve Removal"